Every plan on this page was drawn by our Studio Solver, which tries thousands of arrangements and keeps only the ones that pass every clearance check. Pick your size, or jump to the three measured layouts for a 300 sq ft studio.
200 sq ft
11′ 4″ × 14′ 2″ main room (160 sq ft)
A full bed, desk and dresser fit. Swap the dresser for a loveseat and you need 24″ paths.
300 sq ft
14′ 5″ × 18′ 0″ main room (260 sq ft)
A queen, a 68″ sofa, coffee table, desk and dresser. A dining table needs 24″ paths, or a square room.
350 sq ft
15′ 9″ × 19′ 8″ main room (310 sq ft)
A queen, a full 84″ sofa, coffee table, desk, dresser and dining table, even with 36″ paths.
Short answer
Fits A 300 sq ft studio holds a queen bed, a 68″ apartment sofa with a coffee table, a 48″ desk and a dresser, with 30″ walkways. A 30″ dining table joins them from 350 sq ft, or at 300 sq ft in a square room. At 200 sq ft the sofa is the first thing to go. From 350 sq ft up, the question is no longer what fits but which layout you like.
350 sq ft
smallest tested size for the full set
30″
walkways in every verdict
3
solved layouts, drawn below
What fits, size by size
Each cell is a Studio Solver run at standard clearances. “Fits” means at least one layout passes every check. “24″ paths only” means it passes only at the minimum level, and “Doesn’t fit” means no level passes.
| Studio | Main room | Full bed + loveseat + desk | Queen + 68″ sofa, coffee table, desk, dresser, dining | Same with an 84″ sofa |
|---|---|---|---|---|
| 200 sq ft | 160 sq ft | 24″ paths only | Doesn’t fit | Doesn’t fit |
| 300 sq ft | 260 sq ft | Fits | 24″ paths only | Doesn’t fit |
| 350 sq ft | 310 sq ft | Fits | Fits | Fits |
| 400 sq ft | 360 sq ft | Fits | Fits | Fits |
| 450 sq ft | 410 sq ft | Fits | Fits | Fits |
| 500 sq ft | 460 sq ft | Fits | Fits | Fits |
| 600 sq ft | 560 sq ft | Fits | Fits | Fits |
Three ways to lay out a 300 sq ft studio
The room: 14′ 5″ × 18′ 0″ after a 40 sq ft bathroom. A 32″ entrance door and a 30″ bathroom door on the bottom wall, a 60″ window centered on the top wall, and a 72″ kitchen counter on the right wall. The furniture: a full bed, a 60″ loveseat with a 36 × 20″ coffee table, a 48″ desk and a 32″ dresser. All three pass every check at standard clearances. Hatched areas are the clear space each check needs.
Layout A: Sofa as a room divider
All checks pass
The bed sits in the top-left corner with its head on the top wall. The loveseat has its back to the foot of the bed, 30″ away, so it splits sleeping from sitting without a bookcase or curtain. The desk is under the window and the dresser takes the top-right corner. The bed is 8′ 8″ from the entrance door swing.
Best for: anyone who wants the bed out of sight from the sofa, without buying a divider.
The trade-off: the coffee table ends 4″ from the entrance door’s swing, so the seating area is the first thing you walk into.
Layout B: Floating sofa
All checks pass
The bed turns sideways with its head on the left wall, and the loveseat floats in the room with 51″ of walkway between its back and the bed. The desk sits beside the window and the dresser moves to the right wall, above the kitchen. The bed is 10′ 5″ from the entrance door swing.
Best for: a wide walkway between the bed and the sofa, and a bed tucked into its own corner.
The trade-off: the seating is in the same spot as in Layout A, so the coffee table again ends 4″ from the entrance door’s swing.
Layout C: Everything against the walls
All checks pass
The bed takes the top-right corner with its head on the right wall. The loveseat sits against the bottom wall between the two doors, facing into the room, with the coffee table 16″ in front. The desk sits beside the window and the dresser is on the left wall. The bed is 11′ 2″ from the entrance door swing, the farthest of the three.
Best for: the most open floor in the middle of the room, and a bed as far from the front door as it gets.
The trade-off: the bed is only 3′ 1″ from the kitchen counter, so you cook right beside where you sleep.
The clearances we checked
These are the numbers behind every verdict on this page. The Studio Solver lets you switch between minimum, standard and roomy; this page uses standard unless it says otherwise.
24″ · 30″ · 36″
Walkways, beside the bed and at its foot
14″ · 16″ · 18″
Sofa to coffee table
42″
In front of the kitchen counter
30″
To pull out a desk chair
34″
In front of a dresser
32″
Behind each dining chair
full arc
Door swings, kept clear of furniture and chairs
24″ · 30″ · 36″
Walking route from the door
The 34″ in front of a dresser is a 16″ open drawer plus 18″ to stand. The space to pull out a chair or open a drawer has to stay out of every door swing too. Only one side of the bed needs to be open; you can switch to both sides in the solver.
Measure this first
- The main room wall to wall in two places, not counting the bathroom. Studios are rarely a clean rectangle.
- The kitchen counter: its length, its depth, and how far it sits from each corner.
- Both doors: width, which wall they are on, and which way they swing.
- The window: width and how far it is from the nearest corner.
- Your bed frame and sofa at their outside edges, including arms and headboard.
Questions people ask
What is the smallest studio that fits a queen bed and a sofa?
Of the sizes we tested, 300 sq ft. There, a queen, a 68″ apartment sofa, a coffee table, a desk and a dresser pass at standard clearances. Adding a 30″ dining table takes 350 sq ft, or a square 300 sq ft room. At 200 sq ft, a queen, a loveseat and a desk do not fit even with 24″ paths.
How do you separate the bed in a studio without a wall?
Put the sofa at the foot of the bed with its back to it, like Layout A above. In a 300 sq ft studio that leaves 30″ between the bed and the sofa, and the sofa itself becomes the divider.
Can a 200 sq ft studio have a sofa?
Only a loveseat, and the bed decides the rest. A full bed, a 60″ loveseat and a desk pass only at the minimum level, with 24″ paths. Swap in a 42 × 79″ twin and the loveseat and desk pass at standard clearances too. Without the loveseat, a full bed, desk and dresser fit at standard clearances.
Does a dining table fit in a studio?
From 350 sq ft, yes: a 30 × 30″ table fits alongside a queen, a 68″ sofa, a coffee table, a desk and a dresser, even with 36″ paths. At 300 sq ft it fits at standard clearances only in a square room, on the wall between the two doors (see the 300 sq ft layouts). The solver keeps 32″ behind each chair, the NKBA clearance for a seat with no one walking behind it, and keeps that space out of the door swings.
How did you get the room sizes?
We took 40 sq ft off for the bathroom and gave the main room a length of 1.25 times its width. For 300 sq ft: 300 − 40 = 260 sq ft, width = √(260 ÷ 1.25) = 14.42 ft, and length = 14.42 × 1.25 = 18.03 ft. Your studio is likely a different shape, so enter its real width and length in the solver.
Solve your exact studio
Enter your room, doors, window, kitchen and furniture. The Studio Solver checks every clearance above and draws up to three layouts that pass.
Sources
- How to get your furniture arrangement right (Houzz): walkways and the 14–18″ coffee table gap
- A guide to living room clearances (Homes & Gardens): walkways
- How to space furniture in your room (Ballard Designs): coffee table gap
- Kitchen Planning Guidelines 7 and 8 (NKBA): 42″ work aisle and 32″ behind a seated diner
- Desk dimensions (House Plans Helper): 30″ for a desk chair
- Sofa dimensions (Wayfair): sofa sizes
- Mattress sizes and dimensions (Amerisleep): bed sizes; our frames add about 4″ to the mattress